Calendar

The Reliability Calendar

Find the right training to meet your reliability and maintainability engineering needs.

Calendar provided by the volunteers and training providers. Click on Categories and select Webinars to view just webinar listings.

Sun Mon Tue Wed Thu Fri Sat
1
2
ASQ – An Overview of the Reliability and Risk Practice 12:00 pm
ASQ – An Overview of the Reliability and Risk Practice @ webinar
Apr 2 @ 12:00 pm – 1:00 pm
https://register.gotowebinar.com/register/54662609237508099By Norma AntunanoIf you have interest or curiosity about the practice in the fields of Reliability and Risk management, in this session we will share an overview what reliability and risk practitioners do, and what could[...]
3
Lean & Six Sigma World Conference
Lean & Six Sigma World Conference
Apr 3 – Apr 4 all-day
http://leanandsixsigma.org/ Hundreds of Master Black Belts, Black Belts, Green Belts, and Yellow Belts come together each spring to network, learn from the most experienced practitioners in Lean Six Sigma, and exchange ideas. The American Quality[...]
AS – Conducting Successful Measurement Systems Assessments 9:00 am
AS – Conducting Successful Measurement Systems Assessments @ webinar
Apr 3 @ 9:00 am – 10:00 am
https://www.audiosolutionz.com/manufacturing/gage-repeatability-reproducibility-measurement-analysis.htmlBy Steven Waches$159The effective use of data to drive decision making requires adequate measurement systems.  When interpreting data or the results of data analysis, we assume that data or results represent the process. However, excessive[...]
AFE – 7 Steps to a Reliable Culture 12:00 pm
AFE – 7 Steps to a Reliable Culture @ webinar
Apr 3 @ 12:00 pm – 1:00 pm
http://www.afe.org/content.aspx?page_id=87&club_id=244299&item_id=785558Defining the reliability of a facility can be difficult.  Even more difficult is instituting that reliability.  I will give you a definition and 7 steps to take to institute a reliability culture.  When reliable is[...]
4
Hobbs – Physics of Failure for Building Reliability Into Products 8:30 am
Hobbs – Physics of Failure for Building Reliability Into Products @ webinar
Apr 4 @ 8:30 am – 11:30 am
https://register.gotowebinar.com/register/2232378428577348611By Dr. Abhijit Dasgupta$300This course offers an introductory understanding of some of the key engineering accelerated test techniques needed to develop reliable electronic products. Participants are presented with various physics of failure methods to design[...]
5
6
TR – Fishbone Diagram DOs and DON’Ts 8:00 am
TR – Fishbone Diagram DOs and DON’Ts @ webinar
Apr 6 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/3984953784828693505?source=websiteThe fishbone cause-and-effect diagram is recognized as a standard quality tool around the world. Working from Ishikawa’s original idea, there are five lessons that can improve the way people define a problem, dissect the causes[...]
7
8
9
ARMS- Facilitating Root Cause Analysis Training
ARMS- Facilitating Root Cause Analysis Training
Apr 9 – Apr 10 all-day
Register at- https://goo.gl/rNxVDL This course examines many of the common pitfalls used in problem solving and how to avoid them. Building on that knowledge, students learn how to clearly define any event-based problem and how[...]
Level 1 Certified Infrared Thermographer
Level 1 Certified Infrared Thermographer
Apr 9 – Apr 13 all-day
https://www.infraspection.com/product/courses-level-1-intro/Above is link to course description.  To register, please call NDE Institute of Trinidad (868) 653-9343Level I Certified Infrared Thermographer® is a five-day course for the application of qualitative thermal imaging for P/PM, Condition Assessment, Condition[...]
10
SMTA Certification Program
SMTA Certification Program
Apr 10 – Apr 12 all-day
https://www.smta.org/certification/Each SMTA Certification program is a three-day offering consisting of a 1.5-day workshop on topics in SMT Processes or Lean Six Sigma Green Belt. The program concludes on days two and three with an open[...]
RPS – Proactive Maintenance 8:00 am
RPS – Proactive Maintenance @ webinar
Apr 10 @ 8:00 am – 9:00 am
https://www.reliableprocesssolutions.com/pay/r/2/c/Sep17$50What is Proactive MaintenanceExamples of Proactive MaintenanceHow Proactive Maintenance can extend equipment life / lower overall costsProactive Areas to concentrate on with the best payback for the efforts
Accendo – Fundamentals of Weibull Analysis 9:00 am
Accendo – Fundamentals of Weibull Analysis @ webinar
Apr 10 @ 9:00 am – 10:00 am
https://events-na11.adobeconnect.com/content/connect/c1/1107794648/en/events/event/shared/1146836776/event_registration.html?sco-id=1770703636&_charset_=utf-8By Fred SchenkelbergThe Weibull distribution is a versatile tool to analyze time to failure data. Like any tool it could be wielded well or not so well. In this short webinar let’s discuss when and[...]
Pemac – Asset Decision Framework for Optimal Value 9:00 am
Pemac – Asset Decision Framework for Optimal Value @ webinar
Apr 10 @ 9:00 am – 10:00 am
https://www.pemac.org/civicrm/event/info?reset=1&id=264By Nigel D’SouzaMost organisations have implemented processes and tools to collect data to facilitate informed decision-making. Often, they will seek out best practices and measures to assist in decisionmaking or rely on technology to guide the[...]
11
SMRP – Industry 4.0: From Predictive Maintenance to Asset Intelligence 9:00 am
SMRP – Industry 4.0: From Predictive Maintenance to Asset Intelligence @ webinar
Apr 11 @ 9:00 am – 10:00 am
https://portal.smrp.org/eweb/DynamicPage.aspx?Site=SMRP&WebCode=EventDetail&evt_key=2d830cba-b550-4a28-b226-cff96ac4462aBy Nick ArmstrongThis presentation begins in Industry 3.0 with a recap of Predictive Maintenance techniques and then transitions to Industry 4.0 through the concepts of data analysis used in Condition Monitoring. Finally, the presentation will cover[...]
12
ASQ – Reliability Analysis using Reliability Block Diagram( RBD) 9:00 am
ASQ – Reliability Analysis using Reliability Block Diagram( RBD) @ webinar
Apr 12 @ 9:00 am – 10:00 am
https://register.gotowebinar.com/register/8702236899366068738 By Frank Thede A reasonable model (RBD) of any system provides insights to support a design team to prioritize and achieve a desired reliability performance. This webinar will cover the model of a system[...]
PEMAC – Asset Decision Framework for Optimal Value 9:00 am
PEMAC – Asset Decision Framework for Optimal Value @ webinar
Apr 12 @ 9:00 am – 10:00 am
https://www.pemac.org/civicrm/event/info?reset=1&id=264By Nigel D’SouzaMost organisations have implemented processes and tools to collect data to facilitate informed decision-making. Often, they will seek out best practices and measures to assist in decisionmaking or rely on technology to guide the[...]
SMRP – Alignment Standards & The Reliability Workflow 9:00 am
SMRP – Alignment Standards & The Reliability Workflow
Apr 12 @ 9:00 am – 10:00 am
https://portal.smrp.org/eweb/DynamicPage.aspx?Site=SMRP&WebCode=EventDetail&evt_key=82a9c657-12e0-4786-b287-7c6f2825fcd7By Alan LuedekingThis webinar examines workflow in a world class reliability program, illustrated by an alignment problem as it works its way through the system. Useful for both the reliability and maintenance professional as well as[...]
TestOil – UNDERSTANDING PARTICLE COUNTS & SETTING TARGET ISO CODES 9:00 am
TestOil – UNDERSTANDING PARTICLE COUNTS & SETTING TARGET ISO CODES @ webinar
Apr 12 @ 9:00 am – 10:00 am
https://forms.testoil.com/acton/form/4748/018a:d-0002/0/-/-/-/-/index.htmThe ability to interpret the results of oil analysis is vital to guiding significant decisions about preventive maintenance activities. Having someone in your organization who can pick up a report and interpret it in the[...]
13
TR – How to Start with a 5-Why and Expand it – A Titanic Case Study 8:00 am
TR – How to Start with a 5-Why and Expand it – A Titanic Case Study @ webinar
Apr 13 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/3394653479666747137?source=website5-Why is one of the most recognized problem-solving tools. The concept is simple, but its application varies widely. Because it’s misunderstood, 5-Why is frequently discounted as too simple, not quantitative and not repeatable. I’ll explain[...]
14
15
16
Level II Certified Infrared Thermographer
Level II Certified Infrared Thermographer
Apr 16 – Apr 20 all-day
https://www.infraspection.com/product/courses-level-2-intro/Above is link to course description.  To register, please call NDE Institute of Trinidad (868) 653-9343Level II Certified Infrared Thermographer® is a five-day course for the application of quantitative thermal imaging and temperature measurement for[...]
17
IRISS – Level I Principles of Ultrasound
IRISS – Level I Principles of Ultrasound
Apr 17 – Apr 20 all-day
https://www.iriss.com/events/level-principles-ultrasound-april-17th-20th-2018/ Ultrasonic detection equipment has become a trusted source for trending and troubleshooting over the last few decades. The ability now to run the sound waves through a sound analysis software has opened a new[...]
Reliable Plant 2018 Conference and Exhibition
Reliable Plant 2018 Conference and Exhibition
Apr 17 – Apr 19 all-day
http://conference.reliableplant.com/registration/?eid=379743010&bid=1964239Ready for cutting-edge technical insight and innovative ways to improve your facility? Join us for the 2018 Reliable Plant Conference & Exhibition in Indianapolis, Indiana. As the premier event in the maintenance reliability industry, Reliable[...]
PS – Failure Mode Identification Methods and Tools – Efficient Failure Mode Identification 6:00 am
PS – Failure Mode Identification Methods and Tools – Efficient Failure Mode Identification
Apr 17 @ 6:00 am – 7:00 am
https://register.gotowebinar.com/rt/3198324683402230273By Dave PotterThis webinar is about Risk-based methods for asset failure mode identification, including pros and cons of each and guidelines for selection.The webinar covers:•Reasons for using different failure mode identification methods based on asset[...]
Hobbs – Cooling Techniques for Electronic Equipment 2-Day Webinar 8:30 am
Hobbs – Cooling Techniques for Electronic Equipment 2-Day Webinar @ webinar
Apr 17 @ 8:30 am – 12:30 pm
https://register.gotowebinar.com/register/752789820512606467 By Steve Carlson $800 An Extensive 2-Day webinar. April 17 and 18, 8:30am-12:30 Don’t wait until your electronic equipment over-heats or fails because of poor cooling. Find out if your present systems are adequately[...]
IAM – Aligning Asset Management and Finance 10:00 am
IAM – Aligning Asset Management and Finance @ webinar
Apr 17 @ 10:00 am – 11:00 am
https://register.gotowebinar.com/register/6194188203554739202 ISO TC Committee Members Peter Way from Australia and Ryen Tarbet from the US discuss the newly revised ISO TC 251 Technical Paper on “Improving Alignment between Technical and Financial Management within Organizations.” Peter[...]
18
Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2018)
Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2018)
Apr 18 – Apr 20 all-day
http://www.imaps.org/ceramics/ The Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT) conference brings together a diverse set of disciplines to share experiences and promote opportunities to accelerate research, development and the application of ceramic interconnect and ceramic[...]
International Conference on Fan Noise, Aerodynamics, Applications and Systems
International Conference on Fan Noise, Aerodynamics, Applications and Systems
Apr 18 – Apr 20 all-day
http://www.fan2018.org/gb/objective.html This three-day conference will include keynote lectures and technical presentations. The technical presentations will be organised as three technical tracks (see below), focusing on fan applications and systems, fan noise and fan aerodynamics. All[...]
System Reliability and Maintainability Analysis and Optimization
System Reliability and Maintainability Analysis and Optimization
Apr 18 – Apr 20 all-day
http://www.reliabilityprofessional.org/web/Form.aspx?P1=1840 G522A explores advanced concepts and applications for system reliability/maintainability analysis and optimization utilizing a reliability block diagram (RBD) or fault tree analysis (FTA) approach.
Hobbs – Cooling Techniques for Electronic Equipment 8:30 am
Hobbs – Cooling Techniques for Electronic Equipment @ webinar
Apr 18 @ 8:30 am – 12:30 pm
By Steve Carlson$800An Extensive 2-Day webinar. April 17 and 18, 8:30am-12:30Don’t wait until your electronic equipment over-heats or fails because of poor cooling. Find out if your present systems are adequately cooled, how to avoid[...]
SMTA – Stencil Printing Process and Solder Paste Inspection – An In-Depth Look 10:00 am
SMTA – Stencil Printing Process and Solder Paste Inspection – An In-Depth Look @ webinar
Apr 18 @ 10:00 am – 11:30 am
https://www.smta.org/education/presentations/presentations.cfm#stencilprinting By S. Manian Ramkurar, Ph.D. $200 for members / $295 non-members Presented in Two (2) 90 minute Sessions / April 18 and 19 The stencil printing process is the most critical process in surface[...]
19
DFR – WHY DO TEMPERATURE-BASED FEA? 8:00 am
DFR – WHY DO TEMPERATURE-BASED FEA? @ webinar
Apr 19 @ 8:00 am – 9:00 am
https://www.dfrsolutions.com/why-do-temperature-based-fea-11amBy Dr. Natalie HernandezUnless you’re in a perfectly controlled, relatively benign environment, there will be thermomechanical stresses impacting your product. This can occur while driving your car or sending a submarine to explore the Mariana[...]
AS – Use Mistake Proofing to Detect Human Errors and Improve Current Processes 10:00 am
AS – Use Mistake Proofing to Detect Human Errors and Improve Current Processes @ webinar
Apr 19 @ 10:00 am – 11:00 am
https://www.audiosolutionz.com/manufacturing/mistake-proofing-prevent-detect-human-error-production.html$199By Duke OkesHuman error is an inherent problem all organizations have to deal with, whether in a physical production environment or in office and administrative processes. Due to the usual low frequency of these issues[...]
SMTA – Stencil Printing Process and Solder Paste Inspection – An In-Depth Look 10:00 am
SMTA – Stencil Printing Process and Solder Paste Inspection – An In-Depth Look @ webinar
Apr 19 @ 10:00 am – 11:30 am
https://www.smta.org/education/presentations/presentations.cfm#stencilprinting By S. Manian Ramkurar, Ph.D. $200 for members / $295 non-members Presented in Two (2) 90 minute Sessions / April 18 and 19 The stencil printing process is the most critical process in surface[...]
DFR – WHY DO TEMPERATURE-BASED FEA? 11:00 am
DFR – WHY DO TEMPERATURE-BASED FEA? @ webinar
Apr 19 @ 11:00 am – 12:00 pm
https://www.dfrsolutions.com/why-do-temperature-based-fea-2pmBy Dr. Natalie HernandezUnless you’re in a perfectly controlled, relatively benign environment, there will be thermomechanical stresses impacting your product. This can occur while driving your car or sending a submarine to explore the Mariana[...]
IISE – Big Data and Reliability Applications: The Complexity Dimension 11:00 am
IISE – Big Data and Reliability Applications: The Complexity Dimension @ webinar
Apr 19 @ 11:00 am – 12:00 pm
http://www.iise.org/details.aspx?id=643By Yili Hong, Ph.D.During this webcast, the intension is to extend that discussion by focusing on how to use data with complicated structures to do reliability analysis. Such data types include high-dimensional sensor data, functional[...]
20
Oxford Creativity – WELCOME TO TRIZ 2:30 am
Oxford Creativity – WELCOME TO TRIZ @ webinar
Apr 20 @ 2:30 am – 3:30 am
https://triz.clickmeeting.com/welcome-to-triz-20april/registerBy Karen GaddOxford Creativity’s free webinars on TRIZ are popular with global audiences as they are fun, easy to understand, live and interactive. Oxford Creativity will show you how to be innovative and solve your[...]
21
22
23
The Reliability Conference
The Reliability Conference
Apr 23 – Apr 27 all-day
http://www.cvent.com/events/the-reliability-conference-2018/event-summary-f5d4dbfc7f58426ba89a90ff9912e8cc.aspx?dvce=1 The RELIABILITY Conference™ co-located with the Internet of Condition Monitoring (IoCM) Symposium is produced by Reliabilityweb.com® and Uptime® Magazine, names you trust to bring you the best information available. Innovation in asset management, reliability[...]
24
ARMS- RCM201 An Intro to Maintenance Strategy Development Training
ARMS- RCM201 An Intro to Maintenance Strategy Development Training
Apr 24 – Apr 25 all-day
Register at- https://goo.gl/PPuVhc This course delivers everything you need to create and implement optimal maintenance strategies that deliver excellent asset performance at low cost. You will learn how to compare, analyse and select the best[...]
Design for Reliability (DFR) Program Planning and Implementation
Design for Reliability (DFR) Program Planning and Implementation @ Singapore
Apr 24 – Apr 26 all-day
https://store.reliasoft.com/store/product.php?productid=1062&cat=17&page=1&_ga=2.103770054.752800926.1515440470-2001407406.1496856172 D560 provides an overview of the entire set of methods and tools that support Design for Reliability (DFR) initiatives from the initial concept through production. Topics include reliability goals, identifying critical items, quantifying and[...]
Reliability Leadership Workshop
Reliability Leadership Workshop
Apr 24 – Apr 27 all-day
http://www.cvent.com/events/the-reliability-conference-2018/custom-20-f5d4dbfc7f58426ba89a90ff9912e8cc.aspx?dvce=1 This workshop is co-located with The RELIABILITY Conference and requires separate registration. You will not be able to attend the conference and the workshop since this is a full 4-Day workshop. The workshop breaks[...]
SMTA Certification Program
SMTA Certification Program
Apr 24 – Apr 26 all-day
https://www.smta.org/certification/Each SMTA Certification program is a three-day offering consisting of a 1.5-day workshop on topics in SMT Processes or Lean Six Sigma Green Belt. The program concludes on days two and three with an open[...]
AS – Conducting Successful Measurement Systems Assessments 9:00 am
AS – Conducting Successful Measurement Systems Assessments @ webinar
Apr 24 @ 9:00 am – 10:00 am
https://www.audiosolutionz.com/manufacturing/gage-repeatability-reproducibility-measurement-analysis.htmlBy Steven Wachs$159Drive your Organization’s Decision Making with Capable Measurement SystemsThe effective use of data to drive decision making requires adequate measurement systems.  When interpreting data or the results of data analysis, we assume that[...]
25
Conferencia Gacma
Conferencia Gacma @ Costa Rica
Apr 25 – Apr 27 all-day
https://www.cogacma.com/ COGACMA 2018 será un evento dirigido a profesionales del área de tecnología, ingeniería, mantenimiento, operaciones, confiabilidad, inspección, abastecimiento y cadena de suministro a los diferentes niveles de la organización. Capacitación e intercambio de conocimientos[...]
26
DFR – OPTIMIZATION OF CAPACITIVE TOUCH SENSORS THROUGH SIMULATION 8:00 am
DFR – OPTIMIZATION OF CAPACITIVE TOUCH SENSORS THROUGH SIMULATION @ webinar
Apr 26 @ 8:00 am – 9:00 am
https://www.dfrsolutions.com/optimization-capacitive-touch-sensors-through-simulation-11amBy FieldscaleCapacitive touch sensors are replacing all types of mechanical switches in a very wide range of applications due to their low cost and high reliability: white goods, automotive interior, aviation, consumer electronics are only[...]
TR – Tips & Tricks for using the Cause Mapping Template 8:00 am
TR – Tips & Tricks for using the Cause Mapping Template @ webinar
Apr 26 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/8535180401798835457?source=websiteThis FREE Webinar will provide you with an overview on how to use the Cause Mapping template in Microsoft Excel. We will demonstrate how powerful the drawing tool within Excel can be to document, communicate[...]
AS – Leveraging Process Failure Mode and Effects Analysis for Reducing Process Risk 9:00 am
AS – Leveraging Process Failure Mode and Effects Analysis for Reducing Process Risk @ webinar
Apr 26 @ 9:00 am – 10:00 am
https://www.audiosolutionz.com/manufacturing/failure-mode-effects-analysis-reducing-process-risk.htmlBy Duke Okes$199Failure mode and effects analysis (FMEA) is the most comprehensive qualitative risk assessment tool.  However, it can also be burdensome, for while the traditional FMEA is widely used, what organizations actually get out[...]
IISE – A Digital Transformation Journey for the Supply Chain 11:00 am
IISE – A Digital Transformation Journey for the Supply Chain @ webinar
Apr 26 @ 11:00 am – 12:00 pm
http://www.iise.org/details.aspx?id=643By Thembani TogweThere is a lot of talk about Industry 4.0 and supply chain digitization. What are the forces that have brought Industry and supply chains to this point? How do leaders take the digital transformation[...]
27
28
29
30
ARMS-Facilitating Root Cause Analysis Training
ARMS-Facilitating Root Cause Analysis Training
Apr 30 – May 1 all-day
Register at- https://goo.gl/r2xDaz This course examines many of the common pitfalls used in problem solving and how to avoid them. Building on that knowledge, students learn how to clearly define any event-based problem and how[...]
ESTECH 2018
ESTECH 2018
Apr 30 – May 3 all-day
http://www.iest.org/Meetings/ESTECH The ESTECH Annual Meeting and Exposition is the leading conference for professionals in Controlled Environments/Cleanrooms, Environmental Testing, and Nanotechnology Facilities. With 100+ opportunities to learn, network, influence, and contribute through seminars, classes, Working Group[...]

Powered by WordPress. Designed by WooThemes