ASQ – Integrating FMEAs, FMEDAs and Fault Trees for Functional Safety

April 9, 2020 @ 9:00 am – 10:00 am

FMEAs traditionally have only incorporated single point faults. In this ground breaking presentation of the Omnex Method, the functional safety FMEA will be shown to include both single and multi-point faults and incorporate safety mechanisms as preventive controls. As the FMEA is filled out, the FMEDA will be populated, providing consistency between the FMEDA and FMEA techniques. The FMEA of the hardware is at the hardware system level, while the FMEDA is at the component level and the failure modes of the FMEDA are component failure modes. If the FMEA is completed using the AIAG-VDA FMEA, where the higher level, focus level, and lower levels are related and there is a cause and effect relationship between the failure modes, then the FTA can also be developed from the FMEA. In this way, the FMEA, FMEDA and FTA are linked documents and the FMEDA and FTA provide the single point fault, multi-point fault, and the “Probabilistic Metric for random Hardware Failures” (PMHF) metrics in a consistent manner.

Join us for a presentation of a ground breaking methodology of conducting safety analysis and hardware metrics for functional safety using linked FMEA, FMEDA and FTAs.

Comments are closed.

Powered by WordPress. Designed by WooThemes