Calendar

The Reliability Calendar

Find the right training to meet your reliability and maintainability engineering needs.

Calendar provided by the volunteers and training providers. Click on Categories and select Webinars to view just webinar listings.

Sun Mon Tue Wed Thu Fri Sat
1
CBM: Alignment Fundamentals – Get Your Ducks In A Row 2:00 am
CBM: Alignment Fundamentals – Get Your Ducks In A Row @ webinar
May 1 @ 2:00 am – 3:00 am
https://register.gotowebinar.com/register/4439828349954620675By Louis PeacockThis webinar will discuss the alignment process from the view of an alignment technician, combining 10 years of experience utilizing various alignment tools, methods & techniques. Tips & potholes during this 10 years[...]
C4A – Human Error Tool Box: A Practical Approach to Human Error 9:00 am
C4A – Human Error Tool Box: A Practical Approach to Human Error @ webinar
May 1 @ 9:00 am – 12:00 pm
https://www.compliance4all.com/control/w_product/~product_id=502496LIVE/~sel=LIVE/~Ginette_Collazo/~3-Hour-Virtual-Seminar-on-the-Human-Error-Tool-Box:-A-Practical-Approach-to-Human-Error-$290By Ginette CollazoThis course provides a practical approach that will allow you to understand human behavior in the workplace, to assess your current human reliability situation, and support human error reduction efforts at your site.Based[...]
SMRP – 7 Habits of a Highly Effective Maintenance Leader 9:00 am
SMRP – 7 Habits of a Highly Effective Maintenance Leader @ webinar
May 1 @ 9:00 am – 10:00 am
https://portal.smrp.org/eweb/DynamicPage.aspx?Site=SMRP&WebCode=EventDetail&evt_key=ec860012-e71b-4a8e-bc4a-160152b64186By Ricky SmithFree for members / $35 non-membersIn Maintenance Management, whether a manager or supervisor it is critical to follow habits proven to be effective. In this presentation, I will provide the 7 Habits of[...]
C4A – Fishbone Diagramming 10:00 am
C4A – Fishbone Diagramming @ webinar
May 1 @ 10:00 am – 11:00 am
https://www.compliance4all.com/control/w_product/~product_id=502494LIVEBy Michael Abitz$150Fishbone Diagramming is an analytical approach used to identify and solve problems. Analysis is presented in the Seven Basic Tools of Quality in addition to advanced methods used to increase organizations effectiveness, efficiency[...]
2
CBM – Revolution in Fluid Film Bearing Monitoring 8:00 am
CBM – Revolution in Fluid Film Bearing Monitoring @ webinar
May 2 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/2502513051488483587By Dries Van LoonFor the last 40 to 50 years, the industry standard to monitor bearing wear or machine problems on the most process critical and expensive equipment in each plant, has been the proximity[...]
SMRP – Germination of a Failure: Why Does Stuff Really Break Down? 9:00 am
SMRP – Germination of a Failure: Why Does Stuff Really Break Down? @ webinar
May 2 @ 9:00 am – 10:00 am
https://portal.smrp.org/eweb/DynamicPage.aspx?Site=SMRP&WebCode=EventDetail&evt_key=5bea6c1b-dac8-450e-a1d3-e991a026386eBy Robert LatinoFree for members / $35 non-membersWhen front line personnel get really good a responding to failures, they often get accolades for their reactive efforts. A progressive leadership team would be questioning “Why are[...]
C4A – Quality Risk Management Overview 10:00 am
C4A – Quality Risk Management Overview @ webinar
May 2 @ 10:00 am – 11:00 am
https://www.compliance4all.com/control/w_product/~product_id=502425LIVE/~sel=LIVE/~Steven_Laurenz/~Quality-Risk-Management-Overview$150By Steven LaurenzAttendees will come away with the ability to recognize the purpose and value of Quality Risk Management QRM.Explain the level of risk based on severity, occurrence, and detectability and how the QRM process[...]
IISE – Lean Six Sigma and Industrial & Systems Engineering in Practice 11:00 am
IISE – Lean Six Sigma and Industrial & Systems Engineering in Practice @ webinar
May 2 @ 11:00 am – 12:00 pm
https://www.iise.org/details.aspx?id=643By Jack Feng, Ph.D.In this presentation, Jack plans to share his personal stories and professional experiences in applying the industrial & systems engineering principles and concepts to solving real world problems with a focus in[...]
3
TR – How to Avoid Arguments and Effectively Define Problems 8:00 am
TR – How to Avoid Arguments and Effectively Define Problems @ webinar
May 3 @ 8:00 am – 9:00 am
https://www.thinkreliability.com/event/how-to-avoid-arguments-and-effectively-define-problems/In the problem-solving realm, there is a commonly cited adage that a problem well defined is a problem half solved. This saying highlights both the importance and challenge of a good problem definition. Unfortunately, we[...]
4
5
6
7
RPS – Precision Alignment 8:00 am
RPS – Precision Alignment @ webinar
May 7 @ 8:00 am – 9:00 am
https://www.reliableprocesssolutions.com/pay/By Terry Harris $45A Reliable Process Solutions 1-hour webinar event focused on providing you with practical content to improve your reliability program today.This webinar includes a presentation and discussion on:What is Precision AlignmentThe importance of Precision[...]
SMRP – An Overview of the Productive Leadership System 9:00 am
SMRP – An Overview of the Productive Leadership System @ webinar
May 7 @ 9:00 am – 10:00 am
https://portal.smrp.org/eweb/DynamicPage.aspx?Site=SMRP&WebCode=EventDetail&evt_key=cde3f1b5-d3b3-4948-a115-dcb2dbcfd684By Tom MoriartyFree for members / $35 non-membersThis webinar provides a preview of the upcoming book “The Productive Leadership System; Maximizing Organizational Reliability”. It gives an overview of how accountability, Organizational Reliability and Productive Leadership[...]
8
Hobbs – Reliability Demonstration: Theory and Practical Applications 8:30 am
Hobbs – Reliability Demonstration: Theory and Practical Applications @ webinar
May 8 @ 8:30 am – 11:30 am
https://register.gotowebinar.com/register/4070291281783349507By Andre Kleyner$300This 3-hour webinar covers a number of reliability demonstration techniques including success based testing, test-to failure, degradation analysis, and other tools utilized by reliability engineers in the industry to demonstrate the reliability during[...]
C4A – Risk Evaluation and Mitigation Strategies 10:00 am
C4A – Risk Evaluation and Mitigation Strategies @ webinar
May 8 @ 10:00 am – 11:00 am
https://www.compliance4all.com/control/w_product/~product_id=502537LIVE/~sel=LIVE/~Gwendolyn_Wise-Blackman/~Risk-Evaluation-and-Mitigation-Strategies $150By Gwendolyn Wise-BlackmanThis webinar addresses development and implementation of a REMS to inform and train patients and caregivers of potential AE and to allow closer monitoring for AE. Assessing the risk associated with new[...]
Westpak – Medical Device Package Testing per ASTM and ISTA 10:00 am
Westpak – Medical Device Package Testing per ASTM and ISTA @ webinar
May 8 @ 10:00 am – 11:00 am
https://attendee.gotowebinar.com/register/701426144482932994 By Alexea Kouris WESTPAK’s test professionals present a review of ASTM D4169 and ISTA protocols as applied to medical device package distribution testing in the lab environment. The protocols, sequences, and case studies are[...]
Westpak – Medical Device Package Testing per ASTM and ISTA 2:00 pm
Westpak – Medical Device Package Testing per ASTM and ISTA @ webinar
May 8 @ 2:00 pm – 3:00 pm
https://attendee.gotowebinar.com/register/8342241408666422530 By Alexea Kouris WESTPAK’s test professionals present a review of ASTM D4169 and ISTA protocols as applied to medical device package distribution testing in the lab environment. The protocols, sequences, and case studies are[...]
9
ASQ – Understanding Risk to Improve Management Systems 9:00 am
ASQ – Understanding Risk to Improve Management Systems @ webinar
May 9 @ 9:00 am – 10:00 am
https://register.gotowebinar.com/register/189042730201175819 Understanding Risk to Improve Management Systems is a critical element of Reliability. The short definition of Reliability being “Mission Effectiveness”, this presentation speaks to the ability to ensure the effectiveness of the processes that[...]
CBM – The Importance of Proper Sampling For Oil Analysis Success 9:00 am
CBM – The Importance of Proper Sampling For Oil Analysis Success @ webinar
May 9 @ 9:00 am – 10:00 am
https://register.gotowebinar.com/register/8668127858537363971By Evan ZabawskiProper sampling is the foundation of any lube analysis program. Irregular sampling procedures and inconsistent sample locations will lead to data that does not reveal problems adequately, or is interpreted to identify a[...]
10
TR – The Important Connection Between RCA and FMEA 8:00 am
TR – The Important Connection Between RCA and FMEA @ webinar
May 10 @ 8:00 am – 9:00 am
https://www.thinkreliability.com/event/the-important-connection-between-rca-and-fmea-2/Root cause analysis (RCA) is typically used for investigating why a problem did occur so that specific solutions can be implemented to prevent it from occurring again. Failure modes effect analysis (FMEA) is used to[...]
PEMAC – The most important asset on your CMMS: People 9:00 am
PEMAC – The most important asset on your CMMS: People @ webinar
May 10 @ 9:00 am – 10:00 am
https://www.pemac.org/civicrm/event/info%3Fid%3D367%26reset%3D1By Erika MazzaIndustrial maintenance has evolved from simple repair when it breaks to amazing predictable strategies. With these come the need of handling more data to enable better decision-making and effective work management. Unfortunately, we[...]
11
12
13
14
CBM – Integrating Motor Circuit Analysis Into Your Maintenance Program 8:00 am
CBM – Integrating Motor Circuit Analysis Into Your Maintenance Program @ webinar
May 14 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/8938433995007001347By Bill Kruger,Studies show that 83% of electrical winding faults are between conductors. Motor circuit analysis (MCA) is a simple 3 minute non-destructive test that exercises the complete insulation system to quickly and accurately identify[...]
SG – Why is Electrical Infrared Thermography Inspection Important? 8:00 am
SG – Why is Electrical Infrared Thermography Inspection Important? @ webinar
May 14 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/590214940254763277
Accendo – Fundamentals of Tolerance Analysis 9:00 am
Accendo – Fundamentals of Tolerance Analysis @ webinar
May 14 @ 9:00 am – 10:00 am
https://fmsreliability.adobeconnect.com/evxfax56f2tx/event/registration.html By Fred Schenkelberg There are three approaches to set tolerance limits for design elements. Each has ramifications for the eventual manufacturability and reliability performance. Design for manufacturability and reliability hinge of getting design tolerances[...]
C4A – Scrutinizing Test Method Validation (TMV) to Verify the Performance of a Medical Device 10:00 am
C4A – Scrutinizing Test Method Validation (TMV) to Verify the Performance of a Medical Device @ webinar
May 14 @ 10:00 am – 11:30 am
https://www.compliance4all.com/control/w_product/~product_id=502532LIVE/~sel=LIVE/~Jose_Mora/~Scrutinizing-Test-Method-Validation-(TMV)-to-Verify-the-Performance-of-a-Medical-Device$150By Jose MoraThis webinar will help you better understand Test Method Validations to verify the performance of a Medical Device, global reference standards, the FDA requirements and how to perform successful TMV to ensure your[...]
15
C4A – Better Alternatives to AQL Sampling Plans for Risk Management in Incoming QC 10:00 am
C4A – Better Alternatives to AQL Sampling Plans for Risk Management in Incoming QC @ webinar
May 15 @ 10:00 am – 11:30 am
https://www.compliance4all.com/control/w_product/~product_id=502498LIVE/~sel=LIVE/~John_N.%20Zorich/~Better-Alternatives-to-AQL-Sampling-Plans-for-Risk-Management-in-Incoming-QC$150By John N ZorichThe pros and cons of the 2 most widely used sampling plans (ANSI Z1.4, and Squeglia’s C=0) are examined in detail, focusing especially on the weaknesses of such plans in regards to[...]
16
EDM – Reliability of Alternative Solder materials – part 2: mechanical shock reliability 1:00 am
EDM – Reliability of Alternative Solder materials – part 2: mechanical shock reliability @ webinar
May 16 @ 1:00 am – 2:00 am
https://www.cedm.be/activities/webinars/cedm-webinar-13
DFR – PREDICTING ELECTROLYTIC CAPACITOR LIFETIME 8:00 am
DFR – PREDICTING ELECTROLYTIC CAPACITOR LIFETIME @ webinar
May 16 @ 8:00 am – 9:00 am
https://www.dfrsolutions.com/predicting-electrolytic-capacitor-lifetime-webinar-registration During this webinar, you will learn about electrolytic capacitors. David will discuss the different types electrolytic capacitors commonly used in the industry and the different types of failures that can occur along with the[...]
SG – Why is Electrical Infrared Thermography Inspection Important? 10:00 am
SG – Why is Electrical Infrared Thermography Inspection Important? @ webinar
May 16 @ 10:00 am – 11:00 am
https://register.gotowebinar.com/register/590214940254763277
17
18
19
20
SMTA – Successful X-Ray & Optical Inspection in a Tin/Lead or Lead-Free Process 6:30 am
SMTA – Successful X-Ray & Optical Inspection in a Tin/Lead or Lead-Free Process @ webinar
May 20 @ 6:30 am – 8:00 am
https://www.smta.org/webinars/#inspectionBy Bob Willis$25 for members / $95 non-membersArea Array Technology is part of mainstream electronics but until recently very few good inspection criteria were available in the industry. The assembly process for BGAs is fairly[...]
21
NPL – Evaluation Of Embedded Electronics For Use In Harsh Environments 6:30 am
NPL – Evaluation Of Embedded Electronics For Use In Harsh Environments @ webinar
May 21 @ 6:30 am – 8:00 am
https://register.gotowebinar.com/register/3632023751905894913The ongoing trend of miniaturisation in the electronics industry has been focused on the reduction in size of components and component packaging. However, with an inevitable limit due to manufacturing capability, an alternative is required.[...]
DFR – Best Practices in Connector Selection and Qualification 8:00 am
DFR – Best Practices in Connector Selection and Qualification @ webinar
May 21 @ 8:00 am – 9:00 am
https://www.dfrsolutions.com/best-practices-in-connector-selection-and-qualification-webinarBy Josh AkmanConnectors are critical components in almost all electronics today and can often be one of the first items to fail in a device. This webinar will outline best practices in connector selection and[...]
C4A – Root Cause Failure Analysis Closed Loop Corrective Action 10:00 am
C4A – Root Cause Failure Analysis Closed Loop Corrective Action @ webinar
May 21 @ 10:00 am – 11:00 am
https://www.compliance4all.com/control/w_product/~product_id=502495LIVE/~sel=LIVE/~Michael_Abitz/~Root-Cause-Failure-Analysis-Closed-Loop-Corrective-Action-$150By Michael AbitzRoot Cause Failure Analysis is an analytical approach used to identify and solve problems. Analysis is presented in the Seven Basic Tools of Quality in addition to advanced methods used to increase organizations[...]
22
CBM – Profitable Condition Monitoring 8:00 am
CBM – Profitable Condition Monitoring @ webinar
May 22 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/7260309871776920066By Ron KittleCondition Monitoring is an important cornerstone in the Industry 4.0 concept. The purpose of this presentation is to show how Condition Based Maintenance optimizes productivity and increases profitability in process industries. The presentation[...]
Hobbs – Cutting Edge Useful Physics of Failure Reliability Methods and Tools 8:30 am
Hobbs – Cutting Edge Useful Physics of Failure Reliability Methods and Tools @ webinar
May 22 @ 8:30 am – 12:30 pm
https://register.gotowebinar.com/register/5661348383142903809By Dr. Alec Feinberg$400This 4 hour course will provide very useful cutting edge physics of failure reliability methods for a number of important helpful areas to:•Generate an SN Curve using established rules (including notches, grain[...]
C4A – Valid Statistical Rationales for Sample Sizes 10:00 am
C4A – Valid Statistical Rationales for Sample Sizes @ webinar
May 22 @ 10:00 am – 11:30 am
https://www.compliance4all.com/control/w_product/~product_id=502505LIVE/~sel=LIVE/~John_N.%20Zorich/~Valid-Statistical-Rationales-for-Sample-Sizes$150By John N ZorichThis webinar explains the logic behind sample-size choice for several statistical methods that are commonly used in verification or validation efforts, and how to express a valid statistical justification for a chosen[...]
SaRS – Healthcare: Understanding the Safety of Current Systems and Future Technology. 10:00 am
SaRS – Healthcare: Understanding the Safety of Current Systems and Future Technology. @ webinar
May 22 @ 10:00 am – 11:30 am
https://www.sars.org.uk/newsarswebinar/ Where’s the evidence? Understanding safety of current systems and future technologies in healthcare.
23
TR – Introduction to Cause Mapping – Effective Root Cause Analysis 8:00 am
TR – Introduction to Cause Mapping – Effective Root Cause Analysis @ webinar
May 23 @ 8:00 am – 9:00 am
https://www.thinkreliability.com/event/intro-to-cause-mapping-effective-root-cause-analysis/Learn how to become better at solving problems in your job in just 45 minutes. During this FREE live webinar, we’ll demonstrate the Cause Mapping method, as well as answer your specific questions about our[...]
PE – 7 Habits of a Highly Effective Maintenance Leader 11:00 am
PE – 7 Habits of a Highly Effective Maintenance Leader @ webinar
May 23 @ 11:00 am – 12:00 pm
https://www.workcast.com/register?cpak=5862857510811175 By Ricky Smith and Gary Parr Being a Maintenance leader requires one to be efficient and effective. Of course a Maintenance team leader needs to understand how to use planning and scheduling to drive[...]
24
C4A – Enterprise Risk Management Compliance: How to conduct a Compliance Gap Analysis for ERM 10:00 am
C4A – Enterprise Risk Management Compliance: How to conduct a Compliance Gap Analysis for ERM @ webinar
May 24 @ 10:00 am – 11:00 am
https://www.compliance4all.com/control/w_product/~product_id=502483LIVE/~sel=LIVE/~Ms.%20Michael_Redmond/~Are-you-responsible-for-Enterprise-Risk-Management-Compliance:-How-to-conduct-a-Compliance-Gap-Analysis-for-ERM,-how-to-get-started-and-what-to-expect?-$150By Ms. Michael RedmondThis webinar will explain how to conduct a compliance gap analysis for Enterprise Risk Management: both from bench marking and adherence to regulations, best practices, guidelines and standards, and in determining which[...]
25
26
27
ASQ – La Profesión de Confiabilidad (Reliability), tendencias 8:00 am
ASQ – La Profesión de Confiabilidad (Reliability), tendencias @ webinar
May 27 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/63283889724613388 En este Webinar se comparte como las prácticas de Confiabilidad “Reliability” y de manejo de Riesgo son factores importantes independientemente del tipo de organización. La evolución tecnológica ha ido influyendo cambios en nuestros vidas[...]
28
cEDM – Reliability of Alternative Lead-free Solder Materials Part 2: Mechanical Shock Reliability 1:00 am
cEDM – Reliability of Alternative Lead-free Solder Materials Part 2: Mechanical Shock Reliability @ webinar
May 28 @ 1:00 am – 2:00 am
https://www.cedm.be/activities/webinars/cedm-webinar-13Since the ban on lead in solder set by the RoHS directive mid 2006, SnAgCu has replaced eutectic SnPb as the lead-free solder industry standard. SnAgCu has a number of disadvantages compared to SnPb such[...]
29
CBM – Identifying Rotor Anomalies with Electric Motor Testing 8:00 am
CBM – Identifying Rotor Anomalies with Electric Motor Testing @ webinar
May 29 @ 8:00 am – 9:00 am
https://register.gotowebinar.com/register/5262478552875877389By Don BonofrioFinding and confirming rotor problems can be challenging, frustrating and sometimes easy to misdiagnose. Electric motor testing is the optimum technology for identifying rotor problems as well as provide many methods to confirm[...]
C4A – Root Cause Analysis for CAPA – Myths, Challenges, and Best Practices 10:00 am
C4A – Root Cause Analysis for CAPA – Myths, Challenges, and Best Practices @ webinar
May 29 @ 10:00 am – 11:30 am
https://www.compliance4all.com/control/w_product/~product_id=502504LIVE/~sel=LIVE/~Susanne_Manz/~Root-Cause-Analysis-for-CAPA—Myths,-Challenges,-and-Best-Practices$150By Susanne ManzThis webinar will help you understand the critical ingredients for conducting an effective root cause analysis. You will learn about FDA expectations, tools and techniques, and tips for conducting and documenting root cause[...]
30
CBM – Processing Your Site for IIoT Digitization 10:00 am
CBM – Processing Your Site for IIoT Digitization @ webinar
May 30 @ 10:00 am – 11:00 am
https://register.gotowebinar.com/register/9031552735884915725By Greg PerryThere are processes that can help sites get ready for IIoT-enhanced hardware and software implementation. Proper preparation can lead to success, whether that is providing workers with opportunities to learn and experience new[...]
31
C4A – Controlling Human Error in the Manufacturing Floor 10:00 am
C4A – Controlling Human Error in the Manufacturing Floor @ webinar
May 31 @ 10:00 am – 11:30 am
https://www.compliance4all.com/control/w_product/~product_id=502528LIVE/~sel=LIVE/~Ginette_Collazo/~Controlling-Human-Error-in-the-Manufacturing-Floor-$150By Ginette CollazoHuman error is known to be the major cause of quality and production losses in many industries. Although it is unlikely that human error will ever be totally eliminated, many human performance problems[...]

Powered by WordPress. Designed by WooThemes